Walkway Plank Roof Panel Roll Forming Machine

Automatical Walkway Plank Roof Panel Roll Forming Machine with Servo Feeding

Specifications of Roof Walkway Plank Roll Forming Machine

1. Number of stations: 16 stations
2. Forming speed: 10～15M/min (Not including hydraulic cutting time)
3. Roller material: GCr15 with heat treatment and hard chrome-plated HRC58-62
4. Shaft material:S45C quenched and tempered after finishing treatment
5. Shaft diameter:φ70mm
6. Servo motor power for delivering: 2.2KW
7. Punching machine capacity: 100-200T (depending on real needs)
8. Punching system: high speed and punching automatically with servo feeding system.
9. Main motor power: 11KW
10. Power of hydraulic station: 5.5KW
11. Electronic controlling system: full-frequency PLC controlling system
12. Holes punching: holes punching before profile formed
13. Cutting: post cutting with hydraulic driving
14. Material of cutting blade:Cr12 quenched

Description

Walkway is a one-piece metal plank grating manufactured by a cold forming process in the shape of an inverted channel. The web of the channel is the walking surface and has rough serrated edges around diamond shaped openings. Diamond openings are complete with radiused corners at the saddle and side channel location. The extended flanges support the load and provide a built in kick-plate (toe-board).

Technological Process

Coiler loading → feeding in (servo delivering) and straightening →high speed holes punching → rolling &

forming → cutting after formed→ stacker running out

Applications

Metal Planks are used in a wide range of industries for many applications such as; Mezzanines, Walkways, Platforms, Staircases, Ramps and many more applications. Perforated Metal Planks especially 'CZ' type due to their unique serrated surface are particularly suited in areas where oil and grease would preclude the use of other gratings.