Y Groove Steel Plate Milling Machine With Double Milling Heads UP / Down Position DIN-Standard Export Poland
Description
This machine is composed of main body, press beam, sliding plate and column, main shaft box, forward box, hydraulic system, electrical box and operation box. It is widely used in processing straight edge, bevel edge and U type groove.
Applications:
This equipment is widely used in milling of U-type stiffer ,or batch production of the work-piece with large length and width .
Specifications:
If you do not see anything that matches your requirements please contact us to discuss your needs further.
| Model | XB-6 | XB-9 | XB-12 |
| The angle of milling | 0-45 |
| The thickness of being processed steel plate (mm) | 6-50 |
| The max depth of milling bevel edge at one time (mm) | 12 |
| traveling speed(m/min) | 0.3/0.5 |
| Returning speed(m/min) | 5 |
| Spindle rev.(rpm) | 125-800 |
| Hydraulic pressure (Mpa) | ≤3.5 |
| The number of the cylinders | 8 | 11 | 15 |
| The height between the worktable and the ground (mm) | 900 |
| The power of driving motor (kw) | 1.1/0.85 |
| The power of milling motor (kw) | 3 |
| The power of oil pump motor (kw) | 5.5 |
Competitive Advantage:
1. The rail of lathe bed use high quality carbon steel, welded together with the machine after milling, and then by machining, which with good Wear-resisting performance, and it’s hard deformation.
2. lathe bed, wall panels, and pressure beam welded by high quality plate, using box-type structure. All welds according to specifications welding, after welding parts need to be annealed to eliminate the welding stress. Lathe bed rail is 45 # steel forgings, processed high-frequency hardening, hardness HRC45 ~ 50, removable, and the bed fixed with bolts and dowel pin for easy maintenance.
3. .The normal elastic deformation of the beam on elastic 8-20mm, cylinder release after the reset is a normal situation.
4. .The trolley of the travel box drove by one feeding motor and fast return motor. The travel box install with reduce unit, one extend gear matched on the rail, start the motor it can move the trolley as milling speed. Feeding speed is variable, fast speed can upto 1m/min,travel smooth, with high milling efficiency. The travel also install with fast return motor, fast return speed is 5m/min,A clutch to control work.
5. .Cross slider installed on the trolley box , power-operated lifting, warm and wheel reducer, screw driven slide down. Manually adjustable front and rear direction, from top to bottom and front and rear direction of the Vice-regulation are used to guide rail. Cross slider adjusting smooth and reliable, easy operation
6. .Angle adjusting mechanism mounted on the lifting of regulatory agencies on a skateboard, skateboarding down with the lift. The unit mainly by a fan-shaped worm gear and a worm component, manual adjustment. Head connected to the fan worm gear by an transition plate, , the angle adjusting mechanism allows Head 0-45 ° angle with the horizontal adjustment. Meet the needs of groove.
7. Hydraulic control system install inside of the lethe bed, the bottom half of the hydraulic control is the oil box, top half install with hydraulic components, pump station and motor, etc. Hydraulic oil through hight pressure hose to each oil way and cylinder.
