Automatic Edge Milling Machine Double Head With High Speed Changeable Siemens VFD Hydraulic Press Steel Plate
Description:
Our new generation of XBJ milling machine, high automation, user-friendly design, than the old models greatly increased by 2 times the speed, milling stability, improve work efficiency, is widely used in steel formwork, pressure vessel manufacturing, shipbuilding, Chemical, oil engineering machinery, bridge construction, stainless steel plate, industrial titanium, carbon steel plate before welding the processing groove, bevel edge, straight edge, U-side edge can be a milling. And can be equipped with the domestic standard milling cutter, processing thickness 6-110mm, and according to user requirements, design and manufacture for 5-140mm thickness of the special specifications milling machine.
Advantages of a company's new research and development of the silent power head speed 60 - 600 points / turn, gear torque torque, eat knife volume, not easy to burn blade.
Advantages of two: milling machine tool body after aging treatment, high precision and good stability, my company's new milling machine rail 45 # steel removable (old milling machine edge of the guide rail wear rail can not be replaced)
The advantages of three; hydraulic pressure system, so as to ensure that the oil temperature does not rise, so that equipment durable.
Milling head setted on the trolley, and in front of the milling head installed with cross slider and angle adjusting unit. After fixed the plate, the cross slider will adjusting the position between milling head and plate, meanwhile it can adjusting the angle adjusting unit, and the milling head can be adjusted in the range of 0-45°, which can satisfy different bevel requirement. When milling, the milling head revolving in a high speed, and milling the plate through milling cutter. Trolley milling speed adjusting VFD in the range of 0.1-1m/min, moving smoothly. In order to improve the working efficiency, the trolley designed with fast return motor, fast return speed upto 5m/min.
Specifications:
If you do not see anything that matches your requirements please contact us to discuss your needs further.
Model | XB-6 | XB-9 | XB-12 |
The angle of milling | 0-45 |
The thickness of being processed steel plate (mm) | 6-50 |
The max depth of milling bevel edge at one time (mm) | 12 |
traveling speed(m/min) | 0.3/0.5 |
Returning speed(m/min) | 5 |
Spindle rev.(rpm) | 125-800 |
Hydraulic pressure (Mpa) | ≤3.5 |
The number of the cylinders | 8 | 11 | 15 |
The height between the worktable and the ground (mm) | 900 |
The power of driving motor (kw) | 1.1/0.85 |
The power of milling motor (kw) | 3 |
The power of oil pump motor (kw) | 5.5 |
Competitive Advantage:
1. The rail of lathe bed use high quality carbon steel, welded together with the machine after milling, and then by machining, which with good Wear-resisting performance, and it’s hard deformation.
2. lathe bed, wall panels, and pressure beam welded by high quality plate, using box-type structure. All welds according to specifications welding, after welding parts need to be annealed to eliminate the welding stress. Lathe bed rail is 45 # steel forgings, processed high-frequency hardening, hardness HRC45 ~ 50, removable, and the bed fixed with bolts and dowel pin for easy maintenance.
3. .The normal elastic deformation of the beam on elastic 8-20mm, cylinder release after the reset is a normal situation.
4. .The trolley of the travel box drove by one feeding motor and fast return motor. The travel box install with reduce unit, one extend gear matched on the rail, start the motor it can move the trolley as milling speed. Feeding speed is variable, fast speed can upto 1m/min,travel smooth, with high milling efficiency. The travel also install with fast return motor, fast return speed is 5m/min,A clutch to control work.
5. .Cross slider installed on the trolley box , power-operated lifting, warm and wheel reducer, screw driven slide down. Manually adjustable front and rear direction, from top to bottom and front and rear direction of the Vice-regulation are used to guide rail. Cross slider adjusting smooth and reliable, easy operation
6. .Angle adjusting mechanism mounted on the lifting of regulatory agencies on a skateboard, skateboarding down with the lift. The unit mainly by a fan-shaped worm gear and a worm component, manual adjustment. Head connected to the fan worm gear by an transition plate, , the angle adjusting mechanism allows Head 0-45 ° angle with the horizontal adjustment. Meet the needs of groove.
7. Hydraulic control system install inside of the lethe bed, the bottom half of the hydraulic control is the oil box, top half install with hydraulic components, pump station and motor, etc. Hydraulic oil through hight pressure hose to each oil way and cylinder.
