Wuxi Luole Machinery Co., Ltd
Wuxi Luole Machinery Co., Ltd Professional High Quality Roll Forming Machine Supplier
Add to Cart
Flagstaff Welding Machine Square Flagpole Welder Use SAW / MAG Welding Method Automated Light Pole Longitudinal Seam Welder
Machine Main Components :
Machine Introduction :
Light pole shut and welding machine mainly use for combining the steel joint and welding its longitudinal seam . We had exported many this type machine to all over the world. As a specially in producing the pole clamping and welding machine. We have lots of experience in producing this machine.The pole was widely used in the city and road. It is suitable for one piece type polygonal and circle taper light pole. It is an automatic welding line, the dolly with speed adjustable motor can pull (or push) the light pole from small end to big end , The hydraulic cylinder through mechanical chain, Worm wheel push the clamping wheel to close the pole and do welding at the same time.
Technical Parameters
| 1 | Workable Diameter | 60-450mm, | |
| 2 | Workable length | 12000 mm | |
| 3 | Dolly Length | 1500 MM | |
| 4 | Suitable light pole Thickness base | Light pole diameter: 60~450mm | 2.8~3mm |
| Light pole diameter: 70~450mm | 2.8~4mm | ||
| Light pole diameter: 250~450mm | 2.8~6mm | ||
| 5 | Power of Motor for Pump | 4 KW | |
| 6 | Power of Motor for pulling dolly | 4 KW, AC speed changeable type. | |
| 7 | Welding Machine | 630A, (Submerged Arc Welding and | |
| 8 | Welding wire diameter | 1.2,1.6~2mm welding wire, according the pole | |
| 9 | Working Speed | 1.1~2m/min (Note: different thickness speed | |
| 10 | Gross weight | 7500 | |
| 11 | Overall sizes (mm) | 22000x2000x2000 mm (LXWXH) | |
Lincoln welding machine (USA BRAND)
Note:, If chose the Lincoln welding machine,normally it is suitable for Submerged Arc Welding
process
Fast motorized return back for dolly
Note:for the standard machine, the dolly return back can be motorized with working speed, it
is very slow for return back process. So, normally, the operator will open the dolly clutch and
push the dolly by manual.
In order to reduce the manpower, we have option: Fast motorized return back for dolly. The
operator only push button, the dolly will be back to the welding head.
See attached detail photos.
Both Side additional hydraulic cylinder
It is suitable for small diameter big thickness light pole, or steel plate with high tensile
strength light pole.
With this additional option , the diameter from 60~450mm, thickness 2.8~6mm, all pole can be
suitable. And easy for operation.
Applications of Light Pole :
Electricity pole and lamp pole was widely used in the countryside and City ,such as electricity transport pipe , shine lamp pole ; blinker , Offshore,Petro Chemical ; Plate Heat Exchanger ; Charged air cooler ; Pressure Vessel ;Pipe system&Steel works etc.
Competitive Advantage of our productions:
1. All the bolt using 12.9 grade Bolt , not using 8.4 grade. Making the machine more stronger.
2. 20 % overweight design , could making the rotator focus more.
3. Double row wheels ,not only making the wheels stable, but also artifacts to increase friction.
4. All the parts using well-known brands in China or other countries . Quality is more reliable .
5. Using double row bearings.
6. The base of rotator welded by plates, with high strength, no deformation after long time using.
